2013 Boston Fashionweek

Process

Kate Reed

We continued the design process on the body accordion, working to make a sturdy frame to hold everything up. We redesigned, cut and lased together the first three arms that are going in the back. We tried putting the hook on both sides of the accordion, but it didn’t like that, instead it settled with having the hooks on the outside of the arms. We had to measure and approximate each length then redesign our old arms to fit the new parameters. Lacing the arms was tricky because we had to get each length of cord just right so it fit snug and to the angle of the arm.

Now, for the structure; the structure is made of belts that are screwed together. We had to cut out holes in the belts for the 3D hinges, which proved to be very difficult because the belts were made of really hard compressed icky leather stuff. The structure was first on our priority list of things to do because it had to be ready for the model fitting. We also designed a few more arms to go on in various places of the structure.

It’s time to combine the corset and arms. We put a few of the arms on that we had already made and adjusted the strings accordingly. It is currently wearable! It still has movement but now it is different movement. I think that the shoulder shrug makes the corset move the best; it makes the arms flap like wings. We are getting closer and closer to having it put together.

For esthetics we had to take the whole project apart to paint and stain the wood to get rid of the burned look. Once it was disassembled we also had to cut eight more holes in the structure to put on four more arms that we had designed. We had to 3D print more hinges for the extra arms. For all the hinges we have to drill the holes larger because we had a slight calculation error in Rhino.

Once we had all the arms designed and cut out we had to color the arms to make them look like they were stained. We had four different color choices; a red, orange, sand, and a light orange. We ended up going with the sand color. Once we picked our color we had to sand the burnt parts off of the arms and color them. We have eleven arms total, it took a while to sand and cut them all.

We then had to reassemble the accordion. When we were disassembling it we thought that we would just remember which pieces went where, but we were wrong. Reassembling it took a long time. We had to switch the arms around a lot and there was a lot of screwing and un-screwing. The lock bolts are hard and time consuming to screw in. We used a lot of lock bolts.

Once it was assembled we had to tie the laces on each arm. The arms have eight holes for laces each, and they have to be tied a specific way. Each tie has to go inside the other tie, so they don’t get tangled. Also each string goes from the farthest hole in half the arm to the shortest in the other. We have eleven arms to string up total, which is 88 pieces of string we had to tie. There are 88 strings on a piano; so there are 88 strings on our body accordion.

We went to a little bit of the model fitting on Sunday and it was really interesting. The models were super tall. Our model ended up getting switched so we had to readjust the structure. The new model has narrower shoulders. We drilled new holes in the structure so there are more tightening options.

I had put the accordion on to see how it falls. It falls differently on me then the manikin because I have legs the manikin doesn’t. We found some problems… The backs of the hinges are jagged against the body, so we are going to cover it in some fleece so we don’t cut the model. Also some of the polycarbonate supports aren’t stiff enough so we are going to have to add another layer to a few of the front supports. The elastics are also too tight in the front pieces, but that relates directly back to the supports being too thin.

We also fitted Laura for our body accordion. She is a belly dancer and is going to be our model for the video. She and can make super cool movements with her body, which is really cool. The accordion looked great on her. We now have a better plan for the video of the accordion.

Our final steps were getting the strings adjusted so the arms are the right tightness. We then super glued the knots, so that they won’t slip. The super glue was a disaster! Both Sam and I super glued our fingers together at least three times. The superglue containers would just explode in your hand, and then dry immediately. We did end up getting the knots glued after a lot of struggling. We cut off the excess string and we were finished!

I went to the Boston Fashion Week Emerging Trends show and saw my accordion walk. It was SO EXCITING! I heard ooh’s and ahh’s and saw lots of people taking pictures. Way cool.

In Action

Saeed Arida

Final

Kate Reed

The Body Accordion brings together two concepts: music and movement. The Body Accordion is designed to emulate the behavior of an accordion, being flexible and allowing circular movement yet fitted to the body like a corset. The Body Accordion is made of laser-cut plywood “ribs” that attach to a harness designed of recycled leather. 3D printed hinges secure the plywood ribs to the harness and allow the ribs to move and yet be stable at the same time. 

We redesigned the Body Accordion to be a piece in NuVu's "Nature-Tech Collection" for the 2013 Emerging Trends Show during Boston Fashion Week. The corset didn't need to have versatile movement for fashion, so we went much farther with the design, more in the direction of a cage skirt. The structure has three belts in which everything connects - one at the top, one at the waist and one just below the butt. We also experimented with making the original ribs much bigger and more dramatic.

 

Jellyfish Hat

Saba Ghole

Frost Dress

Saba Ghole

NuVu's “Nature-Tech” Collection

Emerging Trends Show, Boston Fashion Week, 2013

Within nature there are many beautiful forms, colors and designs: from the tiniest sea caterpillars exploding with striking colors, to the mighty redwood trees standing gracefully with their elegant structure. Nature is full of beauty and fascinating patterns. This year, NuVu Studio’s Nature-Tech Collection takes inspiration from nature and its fascinating and complex patterns and blends this with the fabrication technology. The Nature-Tech Collection is meant to inspire, create awe, and involve some level fantasy, and create a sense of wonder and illusion.

Using the combined power of digital design (computer aided drafting, 3d modeling) and rapid prototyping tools (laser cutters and 3d printers), the NuVu Studio designers have developed new and unique patterns and forms for the garments included in the Nature-Tech Collection that otherwise would not be possible through traditional methods and processes.  The collection uses a breadth of materials including various industrial materials made accessible through the digital fabrication methods such as plywood, polycarbonate, renewable bioplastic polylactic acid (PLA), and High-density polyethylene (HDPE).

The Nature-Tech Collection is composed of five looks: Pyramidic, Frost Dress, Avian Poncho, Body Accordion, and Jellyfish Hat.

Frost Dress

The Frost Dress is inspired by icicles and frost found in nature. The Frost Dress is made up of 344 different layers of laser-cut icicle-shaped fabric (frost) that was assembled by hand. The chiffon and mesh layered fabric has a frilly and feminine look that also creates the appearance of ice and frost. To balance the femininity and softness of the fabric, the shoulder and bustle frost pieces are made of lenticular polycarbonate that provide a firm shine. They hope this will add a strong contrast between hard and soft in their dress.

Photos by Romana Vystova & Naf Visser

Avian Poncho

Saba Ghole

NuVu's “Nature-Tech” Collection

Emerging Trends Show, Boston Fashion Week, 2013

Within nature there are many beautiful forms, colors and designs: from the tiniest sea caterpillars exploding with striking colors, to the mighty redwood trees standing gracefully with their elegant structure. Nature is full of beauty and fascinating patterns. This year, NuVu Studio’s Nature-Tech Collection takes inspiration from nature and its fascinating and complex patterns and blends this with the fabrication technology. The Nature-Tech Collection is meant to inspire, create awe, and involve some level fantasy, and create a sense of wonder and illusion.

Using the combined power of digital design (computer aided drafting, 3d modeling) and rapid prototyping tools (laser cutters and 3d printers), the NuVu Studio designers have developed new and unique patterns and forms for the garments included in the Nature-Tech Collection that otherwise would not be possible through traditional methods and processes.  The collection uses a breadth of materials including various industrial materials made accessible through the digital fabrication methods such as plywood, polycarbonate, renewable bioplastic polylactic acid (PLA), and High-density polyethylene (HDPE).

The Nature-Tech Collection is composed of five looks: Pyramidic, Frost Dress, Avian Poncho, Body Accordion, and Jellyfish Hat.

Avian Poncho

The Avian Poncho takes inspiration from the designers’ native countries of Mexico and Guatemala and the feathers of native birds. The Poncho is rich with colors to express joy and traditional patterns that represent the culture and land of these places but all expressed with a modern twist. Each color of the chiffon, metallic woven cotton and jersey fabric has its own meaning. For instance, pink represents the flowers that blossom during the spring season in Guatemala. The brown represents the soil on the land around Mexico. The wood used to create the avian-inspired neckpiece and button, represents the forest, and the material that people use to cook on an everyday basis. Digital technologies were used to generate complex patterns that were then laser-cut from the fabric.

Photos by Romana Vystova & Naf Visser

Jellyfish Hat

Saba Ghole

NuVu's “Nature-Tech” Collection

Emerging Trends Show, Boston Fashion Week, 2013

Within nature there are many beautiful forms, colors and designs: from the tiniest sea caterpillars exploding with striking colors, to the mighty redwood trees standing gracefully with their elegant structure. Nature is full of beauty and fascinating patterns. This year, NuVu Studio’s Nature-Tech Collection takes inspiration from nature and its fascinating and complex patterns and blends this with the fabrication technology. The Nature-Tech Collection is meant to inspire, create awe, and involve some level fantasy, and create a sense of wonder and illusion.

Using the combined power of digital design (computer aided drafting, 3d modeling) and rapid prototyping tools (laser cutters and 3d printers), the NuVu Studio designers have developed new and unique patterns and forms for the garments included in the Nature-Tech Collection that otherwise would not be possible through traditional methods and processes.  The collection uses a breadth of materials including various industrial materials made accessible through the digital fabrication methods such as plywood, polycarbonate, renewable bioplastic polylactic acid (PLA), and High-density polyethylene (HDPE).

The Nature-Tech Collection is composed of five looks: Pyramidic, Frost Dress, Avian Poncho, Body Accordion, and Jellyfish Hat.

Jellyfish Hat

The Jellyfish Hat is inspired by the jellyfish that inhabit our curious imaginations, and exist in that place between real and make-believe where strange creatures dwell. The Jellyfish Hat A place, which for me, is filled with soft lights and hazy colors, a place with delicate movements and soft pulses. I feel that jellyfish are most like the images in my head with their simplistic beauty and breakable, other worldly movements. I wanted to create a piece that crossed the border between the “jellyfish” of my head and the jellyfish of the waters.

In order to create this piece on the edge between my head and the real live world, I needed to use innovative materials that have not yet made their full fledged debut into the fashion world. I needed materials that still held a type of mystery. For this reason I decided to not create my piece out of typical material made for apparel, such as cloth, but out of fiber optic thread and plastic. However because I wanted to use material I was inexperienced with I had many troubles in creating this piece. I had to work through numerous prototypes, made with paper, plastic and patterns, made on Illustrator and Rhino, in order to create my piece. Luckily I had lots of help from Saba, Tess and Saeed so that I can say that I am at least not totally ashamed of my final product.

Photos by Romana Vystova & Naf Visser

Leggings update

Tess Lee

Today Daniel came and worked on the design for the leather pieces on the leggings, some progress pics!

2013 Boston Fashion Week

Saba Ghole

Photo by Romana Vysatova